Impact crusher use and advantages

Impact crusher is mainly used to crush materials such as construction materials, metallurgy, chemical engineering, hydropower, etc., especially broken railways, roads, hydropower projects and other moving stones. Why use impact crusher? What are the advantages?
1.Impact crusher wearing parts are used for a long time
The wear of the impact crusher plate hammer is only present on the side facing the material. When the rotor speed is normal, the material will fall on the surface of the hammer, and the back and sides of the hammer will not be worn, even if it is worn on the side of the material. And the bottom grinding rod is also easy to replace. The metal utilization rate of the impact crusher plate hammer can be as high as 45% - 48%.
2. the impact crusher discharge particle size is adjustable
The impact crusher has obvious advantages in the adjustment of the discharge size. The impact crusher has obvious advantages in adjusting the discharge particle size. Compared to other crushers that adjust the size of the discharge opening to adjust the discharge size, the counter-break can be adjusted in three ways. First, adjusting the speed or diameter of the rotor, increasing the speed of the rotor, or increasing the diameter of the rotor at the same speed can increase the pulverization time. Secondly, by adjusting the feeder to change the particle size of the product, the residence time of the material particles in the crushing chamber is shortened, and the production capacity of the crusher is improved. Third, adjust the gap of the grinding chamber to change the particle size of the finished product. The gap adjustment of the grinding chamber is mainly carried out by mechanical or hydraulic type, and the hydraulic type can quickly and conveniently operate the button or the control system to complete the gap adjustment.
3. Impact crusher’s models of various types, easy to configure
The impact crusher produced by our company has complete specifications, and can adopt various configurations according to the nature of the crushed materials, the scale of operation and the requirements of finished products, to meet the needs of users to a large extent.
 4. The impact crusher has simple structure and convenient maintenance.
Only six hammers are installed on the rotor of the impact crusher. The special tools provided by our company can be used to replace the hammers. It takes only one shift to replace one set of hammers. The replacement of the grinding rods only takes tens of minutes. Therefore, the time for inspection and replacement can be greatly reduced.